Here you will find all the information you should need to learn about ThermaSkirt & its installation. If you have a special application or question, please contact us using the contact form on the left.
Results from BSRIA Test Data to BSEN 442-1
@ Flow rate: 56g/sec
All test data based on powder coated white finish RAL 9010 to BS-EN 12206-1.
ThermaSkirt Urban LT Profile
(150mm/6" x 20mm)
Weight: 1.35kg/m
| Boiler Temp |
Watts/m |
BTU/m |
BTU/ft |
dt50
(72°C flow) |
148.50 |
506 |
153 |
| 40°C |
46 |
157 |
45 |
| 45°C |
59 |
201 |
60 |
| 50°C |
73 |
249 |
75 |
| 55°C |
88 |
300 |
91 |
| 60°C |
104 |
355 |
106 |
| 70°C |
142 |
484 |
139 |
| 75°C |
159 |
542 |
164 |
|
|
ThermaSkirt Classic Torus TS Profile
(150mm/6" x 20mm)
Weight: 1.35kg/m
| Boiler Temp |
Watts/m |
BTU/m |
BTU/ft |
dt50
(72°C flow) |
150 |
512 |
155 |
| 40°C |
47 |
160 |
48 |
| 45°C |
60 |
205 |
62 |
| 50°C |
74 |
252 |
76 |
| 55°C |
89 |
304 |
92 |
| 60°C |
105 |
358 |
108 |
| 70°C |
144 |
491 |
149 |
| 75°C |
160 |
546 |
165 |
|
|
ThermaSkirt Regency OG Profile
(200mm/8" x 20mm)
Weight: 1.65kg/m
| Boiler Temp |
Watts/m |
BTU/m |
BTU/ft |
dt50
(72°C flow) |
170.80 |
583 |
177 |
| 40°C |
52.90 |
180 |
55 |
| 45°C |
67.90 |
231 |
70 |
| 50°C |
84.00 |
287 |
87 |
| 55°C |
101.20 |
345 |
105 |
| 60°C |
119.60 |
408 |
124 |
| 70°C |
163.30 |
557 |
169 |
| 75°C |
182.90 |
624 |
189 |
|
|
ThermaSkirt Deco Profile
(115mm/4.5" x 20mm)
(Estimated subject to BSRIA test)
Weight: 1.1kg/m
| Boiler Temp |
Watts/m |
BTU/m |
BTU/ft |
dt50
(72°C flow) |
131.20 |
448 |
136 |
| 40°C |
41.40 |
141 |
43 |
| 45°C |
53.10 |
181 |
55 |
| 50°C |
65.70 |
224 |
68 |
| 55°C |
79.20 |
270 |
82 |
| 60°C |
93.60 |
319 |
97 |
| 70°C |
127.80 |
436 |
132 |
| 75°C |
143.10 |
488 |
148 |
|
|
“DiscreteHeat recommends an allowance of up to 3% to these outputs on exterior walls to allow for back losses. Further precautions may be required depending on the age and/or nature of the construction of the building – please contact DiscreteHeat for advice.”
|
|
ThermaSkirt
Material: Aluminium & Polymer Alloy
Thermal Conductivity: 236w/m2/K
Water Content 0.49l per m
Paint Finish: to BS EN 12206-1
Foil Finish (where applied) Renolit MBAS 0.15mm
Corrosion Resistance: Excellent
Oxygen Permeability: 0 (Negligible)
|
|
Connectors
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix
Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C
|
|
Valves & Return Manifold
Material: Non Hygroscopic Engineering grade polypropylene / Nylon mix
Oxygen Permeability: 0 (Negligible)
O Ring: Balanced Twin Shore Viton & Silicon Mix
Maximum Operating Pressure: 10bar (150psi)
Maximum Op. Temperature: (Greater than or Equal to) 130°C
|
|
Connector Clips, Brackets & Fixtures
Punch pressed 306 Stainless Steel
Mounting Brackets (LT, TS & OG)
High Temperature Resistant Graphite Nylon
Covers & Corners
Ultra-stable temperature resistant ABS & UPVC
Foil Finish (where applied) Renolit MBAS 0.15mm
|
|
Download ThermaSkirt® Design Software